Product Category
Contact Us
Products center
Polymer self-adhesive film pre-laid water proof roll (back-adhesive type)
Mainly made of high-density polyethylene (HDPE) sheets as the core, the upper surface is coated with a self-adhesive layer bonded with post-pouring concrete, and the upper surface is covered with an anti-adhesive protective layer. In order to meet the requirements of the composite construction of two waterproof materials for the basement floor, a back-adhesive self-adhesive layer is specially added. Before the initial setting of the post-cast concrete, the concrete and the self-adhesive layer of the coiled material slowly cross-link and mesh under the action of gravity, and physical adsorption and mortise-tenon effect are generated during the cement curing process, so that the coiled material and the post-cast concrete are firmly bonded together and are not easy to detach
Polymer self-adhesive film (TPR) butyl self-adhesion waterproof roll
The product consists of main thermoplastic rubber sheet, butyl self-adhesive layer and isolation layer. It has excellent properties such as high tensile strength, high elongation, good low temperature resistance and tear resistance. When in use, the release film is removed, and the coiled material can be adhered to the base surface by applying a certain pressure, so that the waterproof layer and the base layer are combined without gaps, and moisture can be completely prevented from infiltrating into the gap between the waterproof coiled material and the structure, that is, water channeling is prevented, and the service life is long
Polymer self-adhesive film (TPO)pre-laid waterproof roll
The non-asphalt-based polymer self-adhesive membrane (pre-laid) waterproofing membrane is a polymer waterproofing membrane produced by a special coating process with thermoplastic polyolefin, thermoplastic elastomer high-performance hot-melt adhesive self-adhesive layer, and weather-resistant release sand.
Polymer self-adhesive film (HDPE) self-adhesion waterproof roll
Polymer self-adhesive film (HDPE) self-adhesive waterproofing membrane is a polymer waterproofing membrane made of high-density polyethylene (HDPE) as the main material and polymer pressure-sensitive adhesive as the bonding material through a special gluing process.
Butyl Elastomer Anti-Corrosion Tape
Butyl Elastomer Anti-Corrosion Tape is a non-curing viscoelastic polymer with unique cold flow properties. It can achieve self-repair function during anti-corrosion and repair processes, so as to realize full protection.
Polypropylene Reinforced Fiber Anti-Corrosion Tape
Polypropylene fiber anti-corrosion tape is a novel environmentally-friendly protective product, representing the leading international and domestic standard in cold-applied corrosion protection tape technology.
Polyethylene Anti-Corrosion Tape
Polyethylene anti-corrosion tape is a roll-type protective material produced by thermally laminating a butyl rubber-based adhesive layer onto a polyethylene-based substrate layer.
Taiji Fusion Tile is a laminated composite panel integrating waterproofing and anti-corrosion for roofing. It consists of a highly weather-resistant and highly reflective polyolefin waterproofing membrane, a multi-layer coextruded adhesive film, high-quality hot-dip galvanized steel sheet, and an anti-corrosion film. The profiled steel sheet on the lower surface of the product provides the structural function of the roof, and the TPO waterproofing membrane on the upper surface can significantly improve the waterproof and anti-corrosion capabilities of the roof steel sheet. The rigid-flexible composite method makes the two different materials complement each other, solving the waterproof and sealing problems that are difficult to solve at some detailed nodes (such as penetrated pipes, ridges, skylights, fans, etc.) of traditional metal roofs. At the same time, it can significantly reduce the waterproof construction time and is a time-saving, labor-saving, and reliable building waterproof material.
Thermoplastic polyolefin (TPO) Butyl self-adhesive waterproof roll
Taiji King Kong Coat - T200 Thermoplastic polyolefin(TPO) butyl self-adhesive waterproofing membrane is composed of a super weather-resistant fluorocarbon composite film as the surface reinforcing material, a refined butyl rubber self-adhesive layer, and a release layer. This product can be laid on the surface of the base layer through the dry-laying process to form a "skin-like" waterproof protection. The product has pressure sensitivity, tackiness, creep resistance, and self-healing ability. It can not only offset the damage to the main waterproof layer caused by various stresses from the base layer but also has self-repairing ability. It is especially suitable for the waterproofing of exposed light steel structure color steel plate roofs.
Polymer self-adhesive film (HDPE) pre-laid waterproof roll
The non-asphalt-based polymer self-adhesive membrane (pre-laid) waterproofing membrane is a polymer waterproofing membrane produced by a special coating process with high-density polyethylene,thermoplastic polyolefin,thermoplastic elastomer high-performance hot-melt adhesiveself-adhesive layer, and weather-resistant release sand.
