Sand Cover Strip/ ButylSand Cover Strip
关键词：
classify：
Keyword： Sand Cover Strip/ ButylSand Cover Strip
Detail
Scope OfApplication:
Scope To Reinforce The Gaps Left By The Joint Process Of Pre-laid Anti-adhesive WaterproofingMembrane,ACovering Reinforcement Scaling Treatmentls Applied. For Damaged Pre-laidMembrane, Repair ls Performed Followed By Sealing After Violent Piercing.
Product Features:
The Deformable Cover Strip ls Capable Of Withstanding A Certain Degree Of DeformationAnd Has A Following Property. lt Has Extremely Flexible Characteristics And Can ConformAnd Seal Well ln lrregular Areas.lt Has The Advantages Of Convenience, Quickness,Reduced Construction Period.Accurate AmountAnd Reduced Waste,lt Has Excellentnitial Adhesion,Holding Power, Low-temperature Bonding, And Other Significant Features.It Does Not Contain Any Solvents, Making lt Safe And Environmentally Friendly.
Note:
In Order To Achieve The Best Results, The Surface Of The Polymer Membrane Should BeCleaned Of lmpurities Such As Water, Oil, Dirt, And Dust Before Use. lf Water ls Used ForCleaning, The Surface To Be Adhered Must Be Completely Dry Before Construction.
Transport and Storage:
During Storage Transportation ,products Of Different Types And Specifications Should BeStacked Separately And Not Mixed Together ,they Should Be Stored Vertically ,with AHeight Not Exceeding Two Layers,Avoid Tilting Or Lateral Pressure,And Avoid ExposureTo Sun And Rain, lf Necessary ,cover With Canvas And Ensure Adequate Ventilation.theStorage Temperature Should Not Exceed 45C。.under Normal Storage And TransportationConditions the Storage Period in One Year.
Construction Method:
Lay The Polymer Waterproof Membrane According To The Marking Line ,take AnAppropriate Amount OfAdhesive Tape And Tear Off The lsolation Paper(film)on TheAdhesive Tape.paste The Adhesive Tape Along The Joint And Use A Small Roller To PressThe Surface Of The Adhesive Tape, Ensuring That The Adhesive Tape ls Fully Bonded ToThe Surface Of The Substrate To Ensure ATight Combination Of The Adhesive Tape AndThe Substrate Surface.
Detailed Explanation Sand Cover Surface
Product Specification:
| Product Name | Product Model | Width | Thickness | Length | Typical Use | Note | |||||
| sand Cover Strip | XW-712 | 120 | 1.2 | 25 | Reinforce Overlapping RepairDamages etc... | Customized Size.largest 1000mm | |||||
| XW-708 | 80 | 25 | |||||||||
| Butyl Sand Cover Strip | XW-712D | 120 | 1.2 | 20 | Reinforce Overlapping RepairDamages etc... | Cuistomized Size.largest1000mr | |||||
| XW-708D | 80 | 20 | |||||||||
Executive Standard:Q/WRXW708-2020
| No | Project Type | Indicator | |||||||||
| 1 | Stickness,min | ≥20 | |||||||||
| 2 | Heat Resistance,80℃,2h | No Flow、Crack、Deformatior | |||||||||
| 3 | Low Temperature Flexibility-25℃ | No Crack | |||||||||
| 4 | Peel Strength N/mm | Cement Morta | ≥0.6 | ||||||||
| 5 | Impermeable(0.3Mpa,120min) | Impermeable | |||||||||
| 6 | Bond Strength With The Cast In Place Concrete N/mm | Untreated | ≥1.5 | ||||||||
| Immersion Treatment | ≥1.0 | ||||||||||
| Sediment Pollution Treatment | ≥1.0 | ||||||||||
| Heat Treatment | ≥1.0 | ||||||||||
Product lmage
Construction Image
Related products
ONLINE MESSAGE
*Note: Please make sure that the information is filled in accurately and the communication is kept smooth. We will contact you as soon as possible