Polymer self-adhesive film (TPO)pre-laid waterproof roll
The non-asphalt-based polymer self-adhesive membrane (pre-laid) waterproofing membrane is a polymer waterproofing membrane produced by a special coating process with thermoplastic polyolefin, thermoplastic elastomer high-performance hot-melt adhesive self-adhesive layer, and weather-resistant release sand.
关键词：
classify：
Keyword： Polymer self-adhesive film (TPO)pre-laid waterproof roll
Detail
Product introduction
The non-asphalt-based polymer self-adhesive membrane (pre-laid) waterproofing membrane is a polymer waterproofing membrane produced by a special coating process with thermoplastic polyolefin, thermoplastic elastomer high-performance hot-melt adhesive self-adhesive layer, and weather-resistant release sand.
Product Advantages
- The waterproof function layer combination design forms a composite waterproof system together with the structure, improving the waterproof safety and reliability of the project；
- The anti-stick layer has a good bonding and adhesion effect with the cast-in-place concrete;
- Dust-proof design, resistant to trampling, and normal construction of subsequent processes can be carried out on it;
- Strong plastic deformation ability, perfectly showing the application performance of the polymer sheet;
- Micro-design system (technology), balancing the bonding and peeling effects, and realizing the controllability of waterproof defects;
- The polymer sheet is flexible, dense, and has good corrosion resistance, and can be designed with special environmental adaptability. Environmentally friendly design, energy saving and environmental protection;
- Standardized construction process, reliable lap joint and fixation.
Product Specification
| ITEM | Description |
| Packaging | It features an environmentally friendly design, ennergy saving and environmental protection |
| Roll width(m) | 1.0, 1.2, 2.0 |
| Roll thickness(mm) | 1.2, 1.5 |
| Roll length(m) | 20 Above |
| Area(m²) | 20.40 Above |
Technical indicators
NO | Primary Item | Index | |
1 | Tensile Force (N/50mm) | ≥ | 600 |
2 | Tensile Strength/MPa | ≥ | 12 |
3 | Film Elongation at Break /% | ≥ | 500 |
4 | Heat Resistance (80℃, 2h) | no slipping, flowing, dripping | |
5 | Flexibility of main material at low temperature (-40℃) | no crack | |
6 | Low temperature flexibility of adhesive layer (-25℃) | no crack | |
7 | Impermeability (0.3MPa, 120min) | Impermeable | |
8 | Seam peel strength (N/mm) | Without Treatment≥
| 4.0 or coil damage |
Product lmage
Related products
ONLINE MESSAGE
*Note: Please make sure that the information is filled in accurately and the communication is kept smooth. We will contact you as soon as possible