Fluorocarbon Membrane (PVDF) Butyl Self-adhesive Waterproof Roll
Product introduction Taiji King Kong Coat-T100 fluorocarbon film butyl self-adhesive waterproofing membrane is composed of a super weather-resistant fluorocarbon composite film as the surface reinforcing material, a refined butyI rubber self-adhesive layer, and a release layer. This product can be laid on the surface of the base layer through the dry-layingprocess to form a"skin-like" waterproof protection. The product has pressure sensitivity, tackiness, creep resistance, and self-healing ability. It can not only offset the damage to the main waterproof layer caused by various stresses from the base layer but also has self-repairing ability. It is especially suitable for the waterproofing of exposed light steel structure color steel plate roofs.
关键词：
Keyword： Fluorocarbon Membrane (PVDF) Butyl Self-adhesive Waterproof Roll
Detail
Product Overview
The Fluorocarbon Film Butyl Self-adhesive Waterproof Membrane ls AHigh-Performance, Cost-effective Waterproof Membrane Composed Of PVDFComposite Film As The Surface Material For Enhanced Protection AndCombined With Butyl Rubber. lt Can Be Directly Applied To The Surface OfTheBase Layer, And The Cold Self-adhesive Construction ls Very Convenient,Forming A Skin-like Waterproof Protection Layer For The Roof.
Product Advantages
- Super Weather Resistance:The upper surface adopts a super weather-resistant fluorocarbon film,which can resist artificial climate aging for 12,000 hours and can be used outdoors for a long time;
- High Reflection and Energy Saving: Good anti-ultraviolet performance and high sunlight reflectivity, effectively reducing the indoor temperature;
- Soft Texture: Especially suitable for and can fully adhere to various shaped base surfaces;
- Super Tackiness: Good initial tackiness and tackiness, easy to stick firmlyand difficult to peel off;
- Reliable Waterproof:The butyl rubber layer has excellent water tightnes sand air tightness, and full adhesion without water channeling;
- Safe and Environmentally Friendly: Does not contain asphalt and solvents,no pollution during construction and use, safe and environmentally friendly;
- Convenient and Efficient Construction: Cold self-adhesive construction, simple operation technology and high efficiency.
Product Specification
| Project Type | Description | |||||||||||
| Packaging | It features an environmentally friendly design, ennergy saving and environmental protection | |||||||||||
| Roll width(m) | 1.0 | |||||||||||
| Roll thickness(mm) | 0.6, 0.8, 1.0, 1.2, 1.5 | |||||||||||
| Roll length(m) | 20 Above | |||||||||||
| Area(m²) | 20.40 Above | |||||||||||
Technical indicators
NO | ITEM | INDEX | |
1 | holding power≥ | 20min | |
2 | heat resistance(100℃,2h) | No flowing,dripping or slipping | |
3 | low temperature flexibility | -40℃,No crack | |
4 | watertightness(0.6MPa,120min) | Inpermeable | |
5 | tensile property | traction/(N/50mm) ≥ | 300 |
Elongation at maximum tension/% ≥ | 50 | ||
Stretching phenomenon | There is no separation between adhesive layer and polymer film | ||
6 | Joint shear strength(N/mm) ≥ | 2 | |
7 | Peeling strength with aluminum plate(N'mm) | Without Treatment ≥ | 1.5 |
Retention rate after heat treatment ≥ | 80 | ||
Retention rate after immersion treatment% ≥ | 80 | ||
8 | Peel strength with cement mortar(N'mm) | Without Treatment≥ | 1.5 |
Retention rate after heat treatment ≥ | 80 | ||
9 | thermal ageing(80℃,1 68h) | Tension retention rate/% ≥ | 80 |
Elongation retention at maximum tension | 80 | ||
low temperature flexibility | -40℃,No texture | ||
10 | Accelerated aging of artificial climate | time | 2500h |
exterior | The film has no bubbles, cracks, delamination, adhesion and holes | ||
Tension retention rate/% ≥ | 80 | ||
Elongation retention at maximum tension | 80 | ||
low temperature flexibility | -30 ℃,No texture | ||
Product Color Options
Product lmage
Construction lmage
Related products
ONLINE MESSAGE
*Note: Please make sure that the information is filled in accurately and the communication is kept smooth. We will contact you as soon as possible